vaporesso vapes gen swag mod pm80 gtx zero pod luxe kit review

vaporesso gen kit come in various colors:

 

– Black

– Midnight Blue

– White

– money

– Green

– Red and blue

 

Specification:

 

– recharging the tank capacity: 5 ml / 2 ml

– Output Watt: 5-100W

– Resistance Range: 0.03-5ohm

– Simple Battery: 21700/20700/18650

– Charging current: 2A

 

In the frame:

 

– Armor Pro Mod

– 18650 Adapter

– baby tank CASCADE (2.5 ml)

– mesh coil (0.18O) is preinstalled

– GT CCELL2 coil (0.3O)

– USB Charging Cable

– User’s Guide

 

Baby Cascade sub-ohm tanks can be purchased separately in various colors:

 

– money

– blue

– Rainbow

– Gold

– Black

– O bright

 

vaporesso swag mod cascade sub-ohm baby is very similar to reservoirs cascade sub-ohms, but there are differences and different capacities. I received a baby waterfall in black and looks good in my opinion. You can see some details on the plastic cap and can see the same details in the control ring airflow. In addition to the ring airflow, you can see engraved “Vaporesso” and the bottom of the tank, you can see recorded “Baby Waterfall” and “Designed and manufactured by Vaporesso”. Sub-ohm tank diameter is 24.5 mm, 58 mm high with drops peak, the baby cascade 5ml capacity, or can buy a release capacity of 2 ml tpd.

 

Cascade baby comes with advanced Delrin 510 drops 2 or ring on it, final dripping is a very nice place and is acceptable for use. 510 can be used by advanced drip else here without any problems. dropwise tip height is 10 mm, the tip diameter is 13 mm drops.

Just below the peak falls in one piece of plastic, the parts here to fix the upper filling system, are blocked and because plastic parts is no possibility that the upper lid can be opened at random, which is very good . In plastic parts, you can see the design that will be easier to pick up the pieces and pull up. You can unscrew the plastic part, but has a reverse thread. If you open the top of the section, you can see below a piece of metal and you can see how the work of filling up here. Top filling here is very interesting and something different from bits of another tank. For the filling, you need to take a piece of plastic and pulling up and can be pushed aside, also on the upper deck, you can see where you have to push to open it. Holes for liquid mail is fine, maybe you will have no problem to fill the tank.

 

waterfall tank with vaporesso pm80, this tank has a capacity of 5 ml it was very good. In the package, you receive a spare glasses if they break one.

To change or clean glass tank, unscrew the cap and fireplaces, also we have here the reverse thread. A taking part in the tank ohms, you can see how the actual mail liquid passes the coil. In this tank, Liquid will also be under glass under glass can see the three slots in which E liquid go down and feed the coils. As the manufacturer says, the way it would be more efficient evacuation with little chance of success can produce dry. Now, no longer you will be able to see the rest of the tank can not in this way, a person of e liquid, but you can always change the tank down and you can see the remaining liquid e.

 

Baby cascade has two coils in the package. pre-installed coil GT mesh, coil resistance is 0.18ohm will come with power and recommended 50-85watts coil. Coils CCELL receive as a spare coil, the coil resistance is 0.3ohm, 35-50watts force recommended to the coil. Moreover, you can buy several types of coils cascading baby ohm secondary tank:

 

 

– GT1 0.2ohm 50-70W

– GT2 0.4ohm 40-80w

– GT4 0.15ohm 30-70w

– GT6 0.2ohm 40-100W

– WP8 0.15ohm 50-110w

– GT CCELL 0.5ohm 20-32w

 

 

 

 

The tank is also compatible with babies animals of the coil, which is a professional network.

To change the coil needs to unscrew the base, the base has a standard thread and screw the coil at the bottom. Put on right here. As always before refueling, should privileged coil with few drops post raps to prevent and after fillable tank and used immediately. Coils works well with liquid and I use vg-pg 70-30 and leaks.

 

 

At the base there is a ring control air flow and you can see some details about the ring that helps the setting. Ring control airflow 3 holes, you can see the airflow and here we have a cap, what is good, what does not fit on one side, will be the pair on the other side.

 

How waterfall tank works sub-ohm baby

 

First, what I want here on top of filling the tank, to fill the tank is very easy and I liked the fact that there is no chance you can open the possibility of filling, you just pull the pieces plastic and a boost to the side, when only fill reintroducing plastic parts and ready. About coils that have received the package, the two coils work well. With the coil CCELL there is much less airflow, but the thread of the batch reel GT airflow, so if you want the tight coil tie CCELL be for you but if you like lots of air flow want more mesh coil.

steam production in the sub-tank ohms is very good for the recommended power, of course, more steam coil mesh but will also have more power to it. solid feel, I think it’s better with the spool of thread, but you can feel better with CCELL coil. In addition there was no leak here.

What you may not like this is when you want to change the coil, for example, you must have a metal part of the tank and unscrew the base, because if the glass is maintained or even fireplace roofless upper deck with a base for the dump thread.

What do you want here very easily and safely fill without possibility that you can open the lid with fine mesh spiral random system that gives a feeling of a very solid build quality it is pretty good and are good-looking tank,

 

gtx mods

 

Pro Armor is in my opinion a very nice mod, which is very subjective, but it looks amazing. Mod supports three types of batteries with adapter 18650, 20700 and 21700. The package will be 18650 battery adapter and if you have a larger battery, you can use the mod works between 5-100w 18650, coil resistance that can you use is 0.03-5ohm. mod 108G weight without battery size and mode is 38.5mm x 27mm x 86mm. You can buy the pro armor in 6 different colors, I have a good appearance of black color and quality so far, no scratches on the model, the build quality is also very good.

Vaporesso armor Pro has a Board of Directors 4.0 Omni and was very quick, just 0.002s.

 

From the top you can see the mod connection stainless steel crinkled, for here is very good and here you can see the spring pin gold plated 510. You can see interesting design 510 connections and the thing is right here mod will not be deleted from the atomizer. You employable here each atomzier a diameter of 26 mm without false.

We have few details about the mod on both sides, you can see engraved “Armor PRO” and behind the mod you can see engraved “Vaporesso”. Always on the side mod you can see the USB port for charging and improves deivde, 2A fast charge carrier mod.

In the front of the mod, you can see the select button the shutter button on the screen, buttons and more and less.

There was nothing here crackles button, very clicky, everything is here. What is interesting here is the shutter button, a large bar on the screen is the shutter button, which I think is very interesting and useful. shutter button very clicky and very comfortable to use, you can press whatever you feel like, I really like the shutter button. The fire Buton worked very well and there missifres all. We had a nice color screen with a lot of information here. The screen is very beautilful but the screen brightness is very low, especially when out, it is because the dark bar at the top of the screen, which reduces the display brightness. When you’re inside the room, basically everything you see is very good, but when you’re out, could be a problem.

 

To activate the mod must click 5 times on the shutter button, the same you have to do when you want to disable.

When the mod lights watt mode, you will see:

 

– The battery indicator

– Preheat mode and

– Power, which seems incredible here

– coil resistance

– against blow

– Volt

zero vape pod

 

On the screen, you can see all the information you need, really.

To lock the device, you need to click 3 times on the shutter button, the same you have to do to unlock the device. When the model is locked, you will not be able to use the plus and minus buttons, but still be able to use the shutter button and the vaporizer. When the device is locked when each key is pressed as a small screen, you will see how to unlock the device and how to turn it off. When the MOD is off the screen, you can see the map and software versions.

At the press again and the same fire button on the screen, you will see the clock, but after a few seconds not use a mod that you will be able to see the clock on the screen. If you press the select button and the fire button on the screen simultaneously, you will see a version of the software, if you are pressed simultaneously the plus and minus buttons show a way mod left.

To adjust the power consumption of plus and minus buttons and the increase or decrease in increments of 0.1 W power, but if the power button is up or down in increments of 1 mg is maintained.

To enter the menu, you must hold down the Select button or press the Select button 3 times.

 

To move, you have to use more or less the button when you want to enter the submenu you have to press the select button, pressing the shutter button to exit the menu.

This mod also has a mode VV know many people as in the SP mode, can use the coil resistance of 0.03 ohm.

If a set of sub-menu is selected, you can change many things. First, you can set is the time you can choose between the analog and digital clock, and can set the time and date. You can adjust the brightness of the screen, it was nice to have this option, but you probably will not use here for the brightness of the display even when set in the dark due to its maximum brightness bar. You can also reset the surf meters and you can see the weather here and panting breath against. You can change the subject, basically, you can change the colors of the screen, you can choose between orange, green, blue, yellow and red. Then we have the smartest option, if the option is enabled, each time the leg of a new atomizer in a mod, mod will automatically adjust the power to the coil. The next option is the same as defined automatic preheating option. You can also set the time display, you can set the clock when it disappears from the screen and can be adjusted between 60min-3. Here you can see the version and the last option is the default.

So in this model, we have a lot of options that I like, the menu is very good and basically can configure what you want here.

 

As I said, this mod is one of the vaporesso luxe kit out there, I really like how it looks, mod is very nice in my opinion. Another option you might here is pre been normal, when connected to a pre been normal when the shutter button will give you a little more power and a little fall, which means they will shoot very quickly pressed, but if you do not like, you can put gently preheating. The chip works well, the board omni 4.0 is very good, I use this mod without any problems, everything works as it should. This view is very nice with a lot of information, but I like using the shutter button is transparent to the best brightness, personally I do not care, but it would be best for you.

Mod supports three types of batteries which is perfect for me because I want to use battery mod 21700. Vaporesso pro armor is very comfortable, feels great in hand, one of the most comfortable mods out there, trust me it is very convenient to use and maintain. It is true that the model has a black screen, but I still love him because of the way he looks and all information on the screen, here we also have a lot of options and settings that personally also similar.

I think pro mod armor is very good and I r

 

You can buy it here: vaporesso vapes

 

Leave a Reply

Your email address will not be published. Required fields are marked *