I received a comment from Uwell Caliburn KOKO.
uwell nunchaku color:
-Size: 29.9 mm x 100 mm-
Material: stainless steel, polycarbonate
-Battery type: 18650/20700/21700 single battery (not included)
-Power range: 5-100W-
Working mode: electric mode, TCR fashion, fashion mecha
-Performance: 0.1-3ohm (VW); 0.1-1ohm (TC)
-Temperature: 100℃-315℃/ 200℉-600
1. Powered by a single battery with a maximum output power of 100W 18650/20700/21700
2. Different working modes: power mode TCR mode and Mech
3. PCBA is dust-proof and moisture-proof, effectively protecting the device CPU
4. The chip has been equipped with various protection circuits to ensure stability, safety and reliability
5. New 6-axis motion sensor operating experience
6. 5V/2A fast charging, reducing time cost
7. Available in 4 colors: silver, blue, black, color
Inside the box:
-Good Nunchaku 2 Mod
-Micro USB cable
The Crown Pod is an improved version of the previous model Nunchaku. The device has 4 different colors, and the design of this mod is the same as before. Personally, I really like the design of this mod. If you like the tube mod, the nunchaku is very convenient to use.
The build quality of the mod is very good, and the feel is also very good. You can see some detailed information of the Ministry of Defense, you can see “nunchaku and 2”, and under the battery cover, you can see “nunchaku and 2” and its webpage. This Ministry of Defense works 5-100W and cooperates with the media. The Nunchaku 2 supports 21,700, 20,700, and 18,650 batteries.
You can see the connections and cables of the existing model from the top, my atomizer has no problem, and the PIN is gold-plated and pops up here. No need to make a proper choice for me, this model can be used for sprays up to 26 mm in diameter.
There is a battery cover and a battery cover under the mod, you can see some details of the mod that you want to open the cover. It’s really good to put it here. If you remove the battery cover, you can see that the direction of the battery has been recorded. Like I said, the device supports 21,700, 20,700 and 18,650 batteries. Usually, if you don’t have 21,700 batteries, you will get an 18650 adapter. Personally, I really want to use 21,700 batteries and think that the device is very compatible with 21700 batteries. On the back, you can see a USB port that can be used to charge the battery, and the mod can quickly support these charging, but usually, I recommend you to use an external charger.
Before making changes, you can see the button on the screen and start.
The “Start” button on this machine is very eye-catching, and its details are very important. Because the trigger is working fine. The screen of the device is small, but the brightness of the screen is very good, and you can see the information on the screen without any problems.
As you can see, we have no buttons and fewer buttons, but here is a sensor.
In addition, the board of the device has dust and moisture resistance.
To activate it, if you perform the same operation, you must click the start button five times to close the module.
On the screen, you can see:
To enter the menu, you must click on the shutter button 3 times, and then enter the menu, you will see:
-Power supply mode
If you want to customize functions, you need Uwell Crown 4
Sometimes when using the shutter button, you should select the power mode, after which you must tilt the Mod to the right to increase or to the left to decrease the power. Similarly, the Department of Defense must scroll left or right 3 times to enter the menu by pressing the shutter button. Senzor works well, once you use it, you can customize almost everything easily.
Protection on these devices:
-Short circuit protection
-Low voltage protection
-Battery reverse connection protection
How do these devices work and my thoughts:
Uwel Calibon Pod is an improved version of the previous model. The design of this device is similar. I like it because the module is very comfortable to use. I really like the tube module. Good building quality, the Ministry of Defense feels like a very dense morning. This mod can use atomizers up to 26 mm in diameter. The previous model was only compatible with the 18650 battery, but they changed it and made it compatible with a really good larger battery. Since this mod is compatible with larger batteries, it is slightly larger than the previous bite. The shutter button is easier to use every day than the previous model E. It is easy to use and remember. I have no doubt about the shutter button, and I believe it will be very good in the future. The sensor works well here, you really get used to it quickly, once you use it, you will be able to customize it quickly and smoothly. The way to use Uwell Amulet Vape is simpler than many people think. In addition, the board has good dust and moisture resistance. So far, this model has worked well, and I still remember how long I used his model before using it for a long time without any problems.
If you like the previous version, but hope that you can’t modify the 21700 version and this version is wrong, then in this case, please tell you.
-More and more buttons, we don’t like it, I personally really like it, and it works very well, once you get used to it there is no problem
-Good construction quality
-The atomizer diameter is 26 mm
-Good fire button
-The sensor works well
-Easy to use
-Very good theme
-Compatible with 21,700, 20,700, 18,650 batteries
-Good screen brightness
-The motherboard is dust and moisture resistant
-Considering the painting quality of the previous model, I can say a good painting
-No mod when shaking
Source more thanks
You can drink the Ministry of Defense here: Uvel Wapepod