Smok vaporizers nord rpm battery trinity price coils review

I received a kit Morph smok nord2 kit the purposes of this review.

 

Smok morphing colors:

 

– Gold black

– 7 colors and black

– Black red

– Blue and Black Prisma

– black and chrome prism

 

Description and features:

 

– Morph Mod 219 Size – 44.8mm x 30.2mm x 84.5mm

– Battery Type: 18650 dual battery (not included)

– Power range: 1 W-219W

– Display: touch screen 1.9 ”

– Input voltage: 6.4V-8.4V

– Output voltage: 0.5V-8.2V

– Cooking time: 0.001s

– Charging Current: 1.8A

– Charging voltage: 5V

– Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)

– Temperature: 200-600 ℉ / ℃ 100-315

Tank size TF -: 25.5 mm x 56 mm

– Capacity of tank: 6 ml

– Discussion: 510 Discussion

 

In the frame:

 

– Morph smok mag 225w

– 6 ml Smok tank TF

– Smok TF BF-Mesh 0.25ohm tank coil (pre-installed)

– 0.25ohm Smok TF BF-Mesh tank coil

– silicone protective glass bulb

– glass tubes Replacedment

– USB Cable

– User’s Guide

– Bedrooms

 

Smok tank tf:

 

 

Tf is 56 ohm subtank mm high and is 25.5mm in diameter. In the package with the atomizer you will receive a glass tank and tank ordinary glass bubbles are very good, also receive a protective silicone in the glass tank and smok nfix coils. atomizer quality construction is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the atomizer “Designed by Smok”, you can buy 5 different colors.

 

Atomizer comes with a drip edge 510 pre-installed, so that the atomizer can be used another drop tip 510 if it does so. Drop by drop point that is pre installed is very nice and I think it is convenient to use. I think it’s very nice that finally made the atomizer 510 is supported, but for some people it would be preferable that the atomizer is compatible with 810 drip tips, however, advanced drip packaging is very comfortable and good looking.

 

This is a high filling syringe. Previous you can see atomizer keys to press for putting up. When the top cover is pressed, you can see the contents of the hole. Fill a large hole and the atomizer can be filled without any problem, so basically, filling here is very simple and can fill the atomizer very fast. More filling works well and should not leak when the atomizer system is filled.

 

Atomizer glass comes with bubble tank and pre-installed in the box will receive regular glass tank. atomizer tank with ordinary glass capacity is the capacity of the tank glass bubble 2 ml and 6 ml capacity is very good and I think many people as the capacity of the reservoir. With the atomizer, you receive a protective silicone for glass tank to protect the tank in case you drop, very good in my opinion.

 

 

Using spray, you receive two rollers and two coils are the same. Coil is bf mesh coil and coil resistance 0.25ohm, is recommended for the coil power is 30-80w 60-70w and better job. Can really easily change the atomizer coil, all you have to do is push the coil atomizer, very easy and simple. When a coil is used first, it must be primed with a few drops and can be put into the atomizer and filled syringes.

 

Basically, you can see the control ring airflow and the ring can be seen two slots airflow. Ring control air flow, we have some details that helps when you want to adjust the air flow, so you can less easily adjust more or airflow and allows you to set aside will be the same side Oher.

 

How does it work? Atomizer and my mind:

 

 

 

the build quality of the atomizer is very good, everything is as it should be. It comes with 510 preinstalled advanced drip which is very good because you can use the other end of the atomizer 510 drip. Drop to drop that comes pre-installed my opinion comfortable to use. It would be preferable atomzier 810 is compatible with the advice drip, so this could be a disadvantage for some people. The system is very easy to complete and can fill the tank very fast, so far, works well. The capacity of the container is 2 ml glass standard, but with a glass tank capacity bubble really good ability 6 ml. In the package, we received silicone protector for your tank that was really good. Really can easily replace the spool into the atomizer and the atomizer, you’ll receive two coils.RPM80 pro battery works very well, taste and also a good steam, this is not the best mesh coils there, but certainly better taste than many I’ve tried sprays. Therefore, the tank is very tf solid deposit in ohms, worked well and it was quite easy to use.

 

 

Drawbacks:

 

– Not compatible with 810 drip tips

 

Pro:

 

– The build quality is good

– easy to fill

– Compatible with 510 drip points

– comfortable drop points fall preinstalled

– 6 ml capacity tank bubbles

– Protective silicone

– The good taste

– Two coils in the package

– Easy to replace the coil

 

modification:

 

Smok Morph is powered by two batteries 18650 and this model works 1-219w. You can buy this model in 5 different colors.

This dimensions 44.8mm x 30.2mm model are x 84.5mm. mod good build quality, everything is as it should be. This mod design is very good in my opinion, have received this blue mod and can say that a beautiful painting. This device is very convenient to use, no sharp edges and large shutter button, because it is a very nice feel in the hand. Faced with this mod you can see “Smok” and behind the mod, you can see the “Morph”. This model has a touch screen that I really like and also supports multiple operating modes mod that can be used.

 

From the top you can see the mod connection and here we have a spring loaded pin gold plated. Put here is good and I have no problem with atomizers I have discussed here. A good connection, which rises slightly, which is good because you do not scratch the Ministry of Defense with atomizers. In this mod, you can use aerosols up to 26 mm in diameter, which is more than was good for me.

 

Sub mod you can see the battery cover. I really like the locking mechanism of the battery cover. When the battery cover is opened, you can see how mod mod paintings batteries and is powered by two batteries 18650. So far I have not had a problem with the battery cover. When the batteries are in the mod and mod stir when there was good rattle.

 

On one side of the mod, you can see the shutter button. The shutter button is huge and I really like the shutter button. shutter button is very convenient to use, is dislocation and works very well. At the top you can see the shutter button and a button using this button, you can lock the screen or off screen. When the button is held locks the screen and clicking the button you can turn off the screen.

 

 

On the front of the mod, you can see the screen and USB port.

You can use the USB port for software updates or to charge the battery of this device means load balanced, but as always, I recommend charge your batteries in an external charger.

In this device, we have a color screen is very nice, big screen, the size of the screen is a 1.9inch screen and in my opinion, this device looks very beautiful and really is a touch screen.

 

To activate it you must click 5 times the shutter button and should do the same to turn it off. When the device is turned on display the power mode, you will see:

 

– I can not

– locking / unlocking

– Time puff

– W

– Preheat

– Left and right

– Resistance

– V

– against blow

– A

– The battery indicator

 

The touch screen works well and so far I have not had a problem with the screen. Also on the screen, you can see everything nice and screen brightness are very good.

In the enter the menu, you can see:

 

– Modus

– My style

smok trinity alpha price

– Setting

 

 

When the mode is selected, you can choose different modes:

 

– Watt

– temperature Ti

– Temperature Ni

– Temperature Ss

 

If you choose me mode, you can set 4 different operating modes, and you can adjust your diet, you can pre-heat and add the name of liquid and NIC.

If you choose Puff Puff, you can reset the counter.

When the setting is entered you can see:

– General (approximately factory reset, accessibility, food)

– Chip (Info)

– topics

– Access code

 

 

If you choose a theme, you can choose a different background and you can choose different colors on the screen and can also set the screen timeout. If you select the access code, you can set your own password, the device asks every time the battery is placed on the mod.

How do these devices work and my thoughts:

 

So Morph mod Smok is very good in my opinion, and certainly one of the best mods out there, I particularly like blue. mod good quality construction and complained about this mod. Chateo also looks good, but I must say that this magnet Finger prints mod will be a disadvantage for someone. In the device can be used to a diameter of 26 mm without good atomziers projection. You really can be easy to put the battery in the Ministry of Defense and so far DIND’T have a problem with the battery cover. There was nothing rattle when the batteries are shaken and when morning. shutter button is great and I really like the type of shutter button. It works well and is dislocation. It is also good that we have a key to lock / unlock the screen and enable / disable screen. This model also supports load balancing, but as always recommend charging your batteries in an external charger. Really beautiful screen and on the screen, we have all the information we need, big screen, the screen brightness is good and works well. I also like that we can change the color of the screen. This device has many options yet very easy to use. Mod works very well if you ask me, I tried with my MTL and atomizers DTL me and runs smoothly and probably will continue to use the device every day. If you are considering buying this mod and mod design you want, I can tell you for all that this camera can be obtained safely.

 

 

 

Drawbacks:

 

– fingerprint magnet

 

 

 

Pro:

 

– Good build quality

– Good design

– Paint Good

– can be used up to 26 mm diameter without false atomizers

– Connecting up slightly

– comfortable to use

– cozy fire button

– Screen Buttons

– beautiful and big screen

– good screen brightness

– Much of the information on the screen

– Easy to use

– The screen works well

– Theme Options

– balanced load

– Door battery works well

– My selection method

– Password Option

– No ring

 

 

sourcemore thanks

You can buy the kit here: smok vaporizers

 

Comment on the Uwell Vape pod Caliburn KOKO Crown Caliburn Amulet Vape

I received a comment from Uwell Caliburn KOKO.

uwell nunchaku color:

-blue
-black
-money
-Iridescent

specification:

-Size: 29.9 mm x 100 mm-
Material: stainless steel, polycarbonate
-Battery type: 18650/20700/21700 single battery (not included)
-Power range: 5-100W-
Working mode: electric mode, TCR fashion, fashion mecha
-Performance: 0.1-3ohm (VW); 0.1-1ohm (TC)
-Temperature: 100℃-315℃/ 200℉-600

feature:

1. Powered by a single battery with a maximum output power of 100W 18650/20700/21700
2. Different working modes: power mode TCR mode and Mech
3. PCBA is dust-proof and moisture-proof, effectively protecting the device CPU
4. The chip has been equipped with various protection circuits to ensure stability, safety and reliability
5. New 6-axis motion sensor operating experience
6. 5V/2A fast charging, reducing time cost
7. Available in 4 colors: silver, blue, black, color

Inside the box:

-Good Nunchaku 2 Mod
-18650 arm
-Micro USB cable
-User Guide

The Crown Pod is an improved version of the previous model Nunchaku. The device has 4 different colors, and the design of this mod is the same as before. Personally, I really like the design of this mod. If you like the tube mod, the nunchaku is very convenient to use.

The build quality of the mod is very good, and the feel is also very good. You can see some detailed information of the Ministry of Defense, you can see “nunchaku and 2”, and under the battery cover, you can see “nunchaku and 2” and its webpage. This Ministry of Defense works 5-100W and cooperates with the media. The Nunchaku 2 supports 21,700, 20,700, and 18,650 batteries.

You can see the connections and cables of the existing model from the top, my atomizer has no problem, and the PIN is gold-plated and pops up here. No need to make a proper choice for me, this model can be used for sprays up to 26 mm in diameter.
There is a battery cover and a battery cover under the mod, you can see some details of the mod that you want to open the cover. It’s really good to put it here. If you remove the battery cover, you can see that the direction of the battery has been recorded. Like I said, the device supports 21,700, 20,700 and 18,650 batteries. Usually, if you don’t have 21,700 batteries, you will get an 18650 adapter. Personally, I really want to use 21,700 batteries and think that the device is very compatible with 21700 batteries. On the back, you can see a USB port that can be used to charge the battery, and the mod can quickly support these charging, but usually, I recommend you to use an external charger.
Before making changes, you can see the button on the screen and start.
The “Start” button on this machine is very eye-catching, and its details are very important. Because the trigger is working fine. The screen of the device is small, but the brightness of the screen is very good, and you can see the information on the screen without any problems.
As you can see, we have no buttons and fewer buttons, but here is a sensor.
In addition, the board of the device has dust and moisture resistance.
To activate it, if you perform the same operation, you must click the start button five times to close the module.
On the screen, you can see:

-W-
deal with
-Coil resistance
-Battery indicator

To enter the menu, you must click on the shutter button 3 times, and then enter the menu, you will see:

 

-Power supply mode
-TCR mode
-Mechanical mode
-Factory settings

If you want to customize functions, you need Uwell Crown 4

Sometimes when using the shutter button, you should select the power mode, after which you must tilt the Mod to the right to increase or to the left to decrease the power. Similarly, the Department of Defense must scroll left or right 3 times to enter the menu by pressing the shutter button. Senzor works well, once you use it, you can customize almost everything easily.

Protection on these devices:

-Short circuit protection
-Low voltage protection
-Temperature protection
-Battery reverse connection protection

 

How do these devices work and my thoughts:

Uwel Calibon Pod is an improved version of the previous model. The design of this device is similar. I like it because the module is very comfortable to use. I really like the tube module. Good building quality, the Ministry of Defense feels like a very dense morning. This mod can use atomizers up to 26 mm in diameter. The previous model was only compatible with the 18650 battery, but they changed it and made it compatible with a really good larger battery. Since this mod is compatible with larger batteries, it is slightly larger than the previous bite. The shutter button is easier to use every day than the previous model E. It is easy to use and remember. I have no doubt about the shutter button, and I believe it will be very good in the future. The sensor works well here, you really get used to it quickly, once you use it, you will be able to customize it quickly and smoothly. The way to use Uwell Amulet Vape is simpler than many people think. In addition, the board has good dust and moisture resistance. So far, this model has worked well, and I still remember how long I used his model before using it for a long time without any problems.

If you like the previous version, but hope that you can’t modify the 21700 version and this version is wrong, then in this case, please tell you.

 

insufficient:

-More and more buttons, we don’t like it, I personally really like it, and it works very well, once you get used to it there is no problem

 

advantage:

-Good construction quality
-The atomizer diameter is 26 mm
-Good fire button
-The sensor works well
-Easy to use
-Comfortable use
-Very good theme
-Compatible with 21,700, 20,700, 18,650 batteries
-Good screen brightness
-The motherboard is dust and moisture resistant
-Considering the painting quality of the previous model, I can say a good painting
-No mod when shaking

 

 

Source more thanks

You can drink the Ministry of Defense here: Uvel Wapepod

On the Uwell Caliburn KOKO nunchaku amulet pod Crown of the review

Well I received a Caliburn KOKO the purposes of this review.

 

Well nunchaku is available in several colors:

– Green Metallic
– iridescent
– Purple
– Black and Gold
– Corrosion of iron
– Black Full
– The Blue Sapphire

Description and features:

– Size: 27.4 mm x 94.5 mm
– Material: Stainless steel
– Power range: 5-80W
– Yield: 0.1 ~ 3 ohm (VW), 0.1 ~ 1 ohm (TC), 0.1 ~ 0.5ohm (manual)
– Temperature range: 100 ~ 300 ° C / 200 ~ 600’F
– A new generation of well control panel E-cigarettes, making sure the tube mod
– Operating mode: power mode, the mode TC (NI, SS), bypass mode
– 18650
– Ergonomic design perfect feel in the hand
– Pocket size when traveling
– simple interaction system,
– Micro USB port for charging

 

In the box:

From the top of the model, it has nothing to do with the plated pin stainless spring steel and wire here either. As mentioned above a diameter of 25 mm, can be used here sprayers anything up to 25 mm without being fake.
Under mod, you can see the battery cover and lid also has a good thread and can tighten or loosen the current change. At the top of the battery, you can see the four winds. An output of the battery cover can be reduced pin and spring pin. Inside, there are more pins mod and you can see very clearly in red, so you know how to put on your battery. No isolation mode, in which case the battery of bands, but do not use the battery if you notice any scratches on the battery.
In the tube, you can see the shutter button, plus and minus buttons USB port and you can see the screen.
here hold the fire button and it’s hard not to find a mod like spray when the shutter has a statue that can be felt under his fingers. the trigger works well, I have no problem with the trigger is very sensitive and dislocation. There are fewer shoes well, too, and I had no problems, but when the mod could move here several key toys.
In the tube there is a USB port lets you charge your battery at the Ministry of Defense, but as usual, we recommend using an external charger to recharge the battery.
Basically, there display is very bright and the screen, you can see everything on the screen is very clear.

To activate the mod must click five times on the shutter button, the same as when you want to disable the mod. When “Well Hello” the Defense Ministry lights appears on the screen and after that, if the power mode of the device used in the display, you will see:

– Power
– The battery indicator
– Coil Resistance
– Volt

 

If the camera uses the mode of control, it appears on the screen:

– Temperature
– The battery indicator
– Coil Resistance
– Power

To enter the menu you must click 3 times on the shutter button, the menu can be seen:

 

– Supply Mode
– Temperature Mode Ni
– Temperature Mode Ss
– Bypass Mode
– Return to factory settings
– Exit menu

Crown 4 uwell

– USB Cable

– Warning Card

– User’s Guide

 

Well Uwell Crown Pod, powered by a battery and 18650 can operate up to 80W. In the widest part of the diameter 27.4MM mod is the height of the model is 94.5mm, but on top of the diameter is 25 mm mod. Nunchaku is not a big tube mod mod in my opinion, it has the perfect dimensions and mod is very comfortable to wear, feels good in the hand because of the way. Nunchaku are made of stainless steel and feels very solid, the build quality is excellent and I can not complain about anything here. color quality so far looks good so I do not see scratches on the mod mod and I use that a lot. You can buy this model in several different colors, 7 colors, black. In the Caliburn Pods, you can see the details, from the top of the mod, you can see sculptures in the tube that you can see engraved “nunchaku Well”. At the top of the battery, you can see some details that help in removing the battery cover and at the bottom you can see engraved “Well Designed by”, “www.myuwell.com” and you can see the stars recorded. Personally, I think the beautiful mod, but this is very subjective.

the entire first mod is a very good shape and feels good in your hands and if you ask me is very convenient to use, it’s hard not to find a shutter button, like burning and what is an additional benefit. I like the size of a mod, mod 94.5mm high, which is a big plus for me, because in combination with most sprayers will be very pleasant due to the high that I can take with me all the mod. Mod has a very interesting feature, I can lock the device, in fact, I like it because there is no way that can be activated in the pocket, it is not really a problem to turn the unit before putting it in his pocket, but he was very good, we had the best choice.
The model is powered by battery and 18650 can not use other batteries here, you can not only use this mod 20,700 air batteries.
This device works great, the fries were good and I did’t have problems, so far so good. I use the power of the lower house and high strength and can not complain, it works as it should. Atomizers in a diameter of 24 mm or 25 mm suit with both the Ministry of Defense, of course, you can also use a spray with beauty rings.
Build quality is very good as a good story and said I will not be a problem when you want to put the battery in the mod. the shutter button and the plus and minus buttons to function properly.
Basically, it is a model that is simple to use, you can choose from four modes, so there is nothing complicated here and you can customize almost everything quickly.
I recommend this mod for those who want to use the tube mods, I think it is a great mod and works as expected without any problems so far.

 

deficiency:

– Do not use the battery 20700

 

Pro:

– The build quality is good
– Very comfortable to use
– Simple Mod, use
– good appearance (subjective)
– Button Happy
– The screen is bright
– Chip works well
– The colors look good

uwell amulet of 5-80watts when the key roughly 0.5W watts is pressed up or down, and 80W power when the plus button and the return to 5W is pressed when the power is on and press the button 5W reduced, go to 80W.

You can lock mod really, all you have to do is press the shutter button and the minus button, you will not be able to use the mod at all until it is unlocked with a key and lower the heat. You can also block only plus and minus buttons, this will have to press the shutter button and the button can vape but you can not adjust the power to the device is opened.

You can get it here: Uwell

A review of various models of VOOPOO

First on the carton packaging usuall come in a sturdy plastic case with Voopoo Drag Mini logo on top and covered with a removable foam padding useful if you want to use for other things. VOOPOO PnP-VM1 Replacement

The case is wrapped in a cardboard box with a picture and the name of the kit in the front, while the back is a list of usuall content, mod colors, original code security, etc.
In this case, there is a change, tank, two coils, user manual, and a USB cable.

The first thing I noticed when this case is taken mod is how it is light. (It Internet 140 grams)
and the battery cover in any hinged safety, with + – of the battery in the direction of the contact.
Skin? Wieght finish combined with a light make you feel comfortable in your hand. comfort alloy metal parts are matte black with black paint splatter effect which resembles a shiny droplets smooth surface when a light fixture, and therefore tried to clean. On the side mod hidden under the rubber plug (to maintain the pockets of fiber in your pocket and your mod) Type-C port to update the firmware, although the manual says that you can use to charge with the included USB cable II always recommend charging the correct use of external battery charge.
mod interior screen reminds me of a sports car, the pilots thought the child the unifying brand name “ARGUS”.
When the mod first Involved in fashion and customize smart power as a PNP Wich coil you use and watts maximum recommended limits for coils 3 clicks strokes of movement for the RBA in which you can adjust the power of full 160W, three clicks mode temperature control wich nickel roller support, titanium and stainless steel. + firefighters and lock all buttons including the shutter button, and firefighters and – button will clear the table and panting. Press three buttons simultaneously will show the ID chip and the level of code?

VOOPOO NAVI is in two parts.

The upper part is made of PCTG is the same module that uses Drag s / x and in accordance with the PNP Voopoo coils are available in different strengths. fill quickly and easily by lifting the rubber plug at the bottom of the car and remained at the bottom with three powerful magnets. the bottom is made of stainless steel, 24 mm diameter at the base and has two slots knurling airflow adjustably control obedient to the control ring Airlow and the spindle 510 so that it can be used in containers or drag mod s / X.
I use a 45W 0.2ohm coil is supplied with open Airlow completely and get a good taste and production clouds. Knowing about coil PNP to encourage Sall and have a little advantage when used, after standing for about 12 hours ago benefit more if it was a very hot day (30 c) and I water the heat eLiquid Wich can be an unfortunate advantage.

Specification:
Argus GT Mod:
Dimensions: 132 mm x 51 mm x 26 mm (Mod is only 86 mm x 51 mm x 26 mm)
Material: Leather + zinc alloy
Output Power: 5-160W
the output voltage: 6.4-8.4V
Resistance Range: 0.1-3.0Ω
18650 requires dual (not included)
Tank VooPoo PnP:
E-liquid capacity of 4.5 ml (2 ml Version TPD)
Material: Stainless Steel + PCTG
Resistance: 0.2 Ohm (PnP-VM5) 0.15 Ohm (PnP-VM6)

content:
1 x VooPoo Argus GT Devices
1 x VooPoo PnP Tank – 4.5 ml (2 ml Version TPD)
1 x PnP-VM5 – 0.2 Ohm (40-60W)
1 x PnP-VM6 – 0.15 Ohm (60-80w)
Cable Type 1 x C
1 x carrying case
User Manual 1 x Warranty and

This is the first time I write a review seading and thank you gift for the celebration of the competition and send VOOPOO PnP 20 / 22.

 

 

Well, this is my last exam powerful and some animals VooPoo.

Thank you very much to the people of @VOOPOO to let me try a big team in recent years.

Here VOOPOO Drag 2 Platinum.

You obtain.
Do it in a plastic box in the Mini was a good idea.
By getting your

Double cell Argus (18650 not included) mod 160W.
Barriers x sheath.
Barriers x 510 converter reservoir housing.
PNP PNP 0.15ohm 0.2ohm coil and the coil.
Cost USB Type C / lead firmware.
information manually wound instructions, gene chip card and security.
The first is compact enough to double the mod 18650. Many sets 26mms and 51 mm x 132 mm (including the adapter box). Very light too.

finished in the same vein as the recent x excellent tensile strength, remember to do things the old habits have lost vape with a mixture of alloys, leather (ish) and carbon.
Not bad for everyone and is certainly a step in the right direction.

The front panel is a relatively simple way. beautiful color screen, large fire button at the top that vibrate and stocky standards and button lowing screen.
USB connected and the surprising side has a chewing gum coverage. Allows easy loading (if that is how they fill, tut tut … .. Lol) overprotection and edified TBH I think we have the 2Amp load for all devices based on the recent gene chip.

160W output I like it as it is realistic. They are not capable of writing pressure to 200W capacitor coupled to the side.The
Battery conveniently stored on the spring locking base lever.
The menu is very similar to a box base x Argus. Watt is automatically limited to the maximum security for the execution of the power coil that is an excellent point and I’m glad to see this trend continue.

New gene chip TT has all these features (see the review taking X for details), in addition to the full time tc (just do the plus and minus buttons to go to TC). RBA RDTA sheath or coil will be perfect for deposits tc action with a sheath or anything.
This has a standard connector cover 510 is a masterstroke.

You can use an adapter like pod tank or select the slide 510 x sheath included.

sheath is 4.5mls is 2 ml simple English. PNP coil is always very good for taste, but I had this problem before filtration of the insulation at the base. This has significantly increased recently 0.15coil and some monkeys have told me things are improving in others. 510 adapter really help here (again, he holds the pod through which a very strong magnet) because it does not allow the inclusion of mod juice so easy.

Other Voopo winners. If you love x reader (me), you’ll love to do the same thing forever.

Anything Different From Lost Vape Orion

This seems to Smok accelerate the release of new products recently. Today we are here to examine the pod system Smok new kit – Smok Trinity Alpha kit. Before we begin, I ask that anyone here bought Orion Q vape missing or DNA pod kit yet? I’m sure you know a little more about the Lost vape Orion series. Well, you might find a reflection of the Orion kit at Trinity Alpha.

 

setting:

Dimensions: 91 x 16 mm 38X

Capacity: 2 ml / 2.8 ml

Coil: coil 0.6ohm North Mesh / Mesh-MTL North coil 0.8ohm

Power: 10-25W (SOFT / NORMAL / HARD MODE)

Battery Type: Built-in 1000mAh

Input voltage: 3.3V-4.2V

Output voltage: 2.4V-6V

Load current: 10.7A

Load voltage DC 5V 1A

Resistance Range: 0.4-1.4ohm

Package Contents:

Smok Trinity Alpha Battery

Smok Trinity Alpha Pod vacuum (2.8 ml)

North Mesh 0.6ohm coil

North-MTL 0.8ohm coil Mesh

1 x USB cable

1 x Manual

battery design

 

As I said above, you will find some reflections on the Trinity vape Lost Alpha Orion series on this kit. Maybe some people like to know what kind of “what is happening with this kit” when you see this image. LOL.

 

The battery is fully made of a zinc alloy material with the surface of process carefully polished. So you can find this kit so glittery and shiny under the light. colors of the rainbow is always a choice of traditional color in the pod kit. On each side of the battery design so as to provide a form of smooth touch feeling resin. But I’m a little scared so easy to leave fingerprints on the surface and the intermediate metal frame. The truth is that just what I fear. On the other hand, the colorful appearance and shiny and pretty obvious sweet. Now keep in mind that this does not leave a scratch on this kit.

 

large fire buttons offer more comfort in cooperation. Compare with Lost Orion vape, no power mode function on this trinity alpha kit with single press button to set. Hard mode / Normal / you can choose to use soft. And the corresponding power is 10W-25W.

 

Meanwhile, there is a security protection to the position of platforms – lock button on the pod cartridge. Unlike the magnetic connection design on the most pod kit, but it is the same as the Lost vape Orion series. Provide special locking button vaping safer if you have a baby that is still being played around you when you vaping. Personally, I would name the baby proof locks.

 

design Pod

 

Pod cartridge also comes with a special design in a way. filling filling pull-then-hole brand becomes easier. Compare with the design of the screw Lost vape Orion port, pull light switch and charging on alpha trinity simpler and more efficient. And you can also see the air hole in the charging port next pods.

 

coil design is inherited from Smok north, which means Trinity alpha pod compatible with the Smok North rollers. North north of mesh nets 0.6ohm and 0.8ohm coil MTL coil included in the package for a range of vaping experience and needs.

 

With the great success that the kit Smok has been done, there will be more of the same pod Smok kit coil design in the future. Well, you can see this coil design in a box kit – Morph kit 219. Check this kit here, you may find of interest.

 

Compare with Lost Orion vape?

 

Honestly, the breakthrough and innovation is what we want to see in the vaping market. Of course, we need to mature technologies in the kit vaping instead of semi-finished products. The Orion lack vape, vape all the happiest love to see a single pod design of this kit. For now, Smok try to learn and reproduce this kind of pod set. Meanwhile, they also make their own adjustments and changes into a single pod kit becomes easier to use. People can not understand why Smok take the path of reproduction because they really have the ability to create and innovate. I do not know either. But we, the fans and vape users, where there is a change, we applaud and support.

 

Decision

 

Leave aside in the same general design, trinity Smok alpha pod kit kit is undoubtedly brilliant. Ensure the design of the special representative coil and excellent performance in this kit. By the way, do not forget the integrated 1000mAh battery. Because you can spend more than a day vaping time. Honestly, I hope will be adopted design of traction and filling on a more human and more pod kit. Believe me, you want to try again after the silicone port connector you use the trinity of Alpha kit Smok.

 

Of course, I would recommend this guy Smok Trinity Alpha kit.

 

Here: Smok Trinity Alpha Starter Kit 1000mAh

 

 

 

Thanks for reading!

Geekvape aegis boost review

I received boost aegis Geekvape the purpose of this review.

 

Aegis Pod System Starter Kit:

 

– Gunmetal

– Black Space

– Aura shine

– Red Devil

– blue Almighty

 

Description and features:

 

– Dimensions: 106.8 x 39.2 x 27.7mm

– Material: zinc alloy, leather and silicone

– Battery capacity: 1500mAh

– Watt Output Range: 5-40W

– Output Voltage Range: 1.0-6.0V

– Speed ​​of firing: 0.08s

– Max power: 40W

– Coil: MESH

– Charge Micro USB port

– Load current: 5V / 1.5A

– Charging Methods: easy access charge

– Air flow: easy access to the air flow valve

– waterproof, shockproof and dustproof for a long life

– 2 / 3.7ml e-juice large capacity for continuous vaping experience

– Portable Size with a sleek, minimalist design

– Fully compatible with the Pod and RDTA

– With the two coils are designed for vaping experience MTL and DTL

– stain-resistant, corrosion resistant and tear resistant

– Some of protection to safeguard a secure and stable vaping

 

 

 

 

 

In the box:

 

– improve the Aegis

– 2 x coil

– USB cable

– Coil Tool

– User’s Guide

– slippery Pointe

– to promote and guarantee card

 

GeekVape Aegis Boost Vape Pod System. Since this device is the shadow of the series, the device is resistant to water, shock and dust, building quality of this device is very good as expected. It is a device with a screen and 5-40w work. Boost is available in 5 different colors are very good. In the package, you will receive two rollers, two ends at the tip of the hat drops and drips very well. The design of this device is really good in my opinion, it is small and easy to pocket. On one side of the device you can see engraved “Geekvape squonk mod kit” and the other side you can see engraved “Aegis”.

Let me start with the cartridge, the device comes with a cartridge and with this unit, you can not change the coil. At the top you can see the tip of the cartridge drops in the package, you’ll receive two very good drip advice, the two extreme drops in my opinion, convenient to use. These devices are not comfortable with 510 drip tips to be a drawback for some, but in my opinion, the transmission of packet drops tips to stay comfortable and enjoyable. cartridge excellent capacity of 3.7 ml, given the size of the unit. In the cartridge, you can see the fill hole and fill the hole with nothing in retail cans fill holes need to take to fill the cartridge. Cartridges are very much in place and the unit is not equipped with a magnet. At the back of the cartridge you can see the part you need to push to release the cartridge. On one side you can see the cartridge slot and the airflow in this device can regulate the airflow is really good.
From the bottom of the cartridge, you can change the coil and in the package, get the tools you use to remove the coil. With this tool, you can easily remove the coil, then just press on the other side. With this device receives two coils, one coil in the cartridge and the other on the package. Receiving coil cartridge is the driving force and power 25-33w 0.4ohm coils are recommended for this coil. Roller receiving coil box is recommended pulse with electricity 15-25W andd 0.6ohm resistance for this coil. As usual, I said to begin when the coil is used in the first place, should be primed with a few drops of liquid E and prevent stroke burns. This unit is compatible with the cartridge RDTA very good because you can create your own coil and save money, RDTA cartridges have not tried, but it was a very good choice.
From the top you can see the mod slots for cartridges and connections and as I said cartridge stays perfectly in place.
This device has an integrated battery and a battery capacity of 1500mAh which is really good considering the size of this unit. On one side of the camera, you can see that you use the USB port to charge the battery.
In front of the mod, you can see the fire button, the screen and plus and minus buttons.
fire button a familiar form, it is clicky and it works fine with no problems. Plus and minus buttons as well and without any problems. This device is a small screen and on the screen, we have all the information we need.

Trun on the device, you need to click 5 times on the fire button, you must do the same to turn it off. When you turn the power on screen, you can see:

 

– against Puff

– Coil Resistance

– The battery indicator

– W

 

 

To lock the plus and minus buttons you need to hold the plus and minus buttons together and you must do the same to unlock the keypad. When the keypad is locked, you can still use the fire button and you can VAPE. When you hold the fire button and the minus button you can reset the breath against.

A protective device:

 

– Over discharge

– Short Circuit Protection

– Output Current

– Protection against overload

 

 

How these devices work and my thoughts:

Thus, mod pod shadow of the car is very well built, this device is waterproof, dustproof and shockproof. build quality of this device is really good. good color choice, and in my opinion, the design of this model is really good, I really like this device looks like another shadow mods. Aegis is the impulse comfortable to use and the device is small and light and because these devices are pocket friendly. With this device in the package you will receive two drip tips are great, but not compatible with 510 drip tips that cheat. Capacity carrtridge really good in my opinion, given the size of this unit. You can change the coil is very easy here and the great thing is that you can buy RDTA cartridge. You can refill the cartridge without any problems. Cartridge holder firmly in place and you can easily remove the cartridge by pressing the back. fire button and the plus and minus buttons either and provided that all the buttons work properly. Built in battery has a capacity of 1500mAh which is good considering the size of this unit. I really like this camera has the screen because you can see all the information we need.
coil package works great, I really like coil 0.4ohm, I want to use for 26W and flavor with this coil is good enough. This device works well, there is nothing I can complain. In this device, you can adjust the air flow and excellent features airlfow you can adjust smoothly.
So I can say that the momentum can be the best auspices pod mod I have tried so far, he has everything he needs to have the mod pod, to use as convenient and media cartridge of RDTA and waterproof, dustproof and shockproof.

The inconvenients:

 

– It is compatible with 510 drip tips

 

 

 

 

 

pro:

 

– Good build quality

– Waterproof

– shock

– anti dust

– Choice of colors

– Two tips flowed in the package

– drip cap peak drop in package

– Two coils in the package

– Cartridge RDTA

– Capacity 3.7 ml

– the fire button and the plus and minus buttons work well

– Convenient to use

– Small and light

– Good taste

– Airflow adjustment

– No leakage

– Easy to fill

– 1500mAh

– screen

– Easy to change the coil

 

 

 

thank you Geekvape

You can buy it here: boost Aegis

Page FB: Geekvape

 

Voopoo Pod System Art Million

Voopoo Pod System art in a million colors, seven colors available for your choice: paint, dark blue, ink, red mesh, silk blue, purple and carbon fiber. NAVI VOOPOO is powered by a 1500mAh Kit – integrated battery and maximum results can not be less than 40W.

NAVI MOD POD

Correct breathing air flow, regulated breathing and respiratory support independent tire and manual modes can be set: Voopoo Vinci Mod has three innovative airflow Me! Rechargeable hand coverage – 3.8 ml of the size of the basic capabilities of your vaping experience. In addition, the kit package comes with Drag NAVI case Voopoo Software PnP – 0.6ohm coil and spray the whole set of PnP smoke MV4 coil. Secondly, it will bring the best experience of the delicate flavor and thick clouds.

Voopoo Drag Starter Kit What’more NAVI resolve this sensitivity is unprecedented and the force of the explosion, with air ducts independent innovation, air inlet mode NAVI enough to take accurate and heavy makeup air subvert their knowledge. And perhaps in a non Voopoo Drag X Pod, read smart features pastel coil mode and other functions. For additional security, the protection of seven to accompany: the old protection – protection of circuits against overload, protecting the maximum power – diacharge protection against over-voltage protection and over – temperature protection. In short, a fantastic and very nice, just be happy and enjoy vaping every day.

Voopoo Drag X Avenger New Chip

Voopoo Navi

Voopoo Drag X Avenger new chip with integrated 1500mAh battery to support the automatic and manual modes to meet your different needs. It also comes with a practical capacity and juice 3.8 ml / 2 ml (HAP) in the mouth of fine droplets. Moreover, the adoption of innovation Voopoo Drag 2 Mini with three patented pneumatic air to breathe independently. In addition to the functions that support all thread reels platinum coil Voopoo cloud Voopoo get a good taste and rich.

Slide Voopoo X Pod is an ultra portable speaker system with the power of traditional mod box. Voopoo Vape has a connection oil resistant battery design and dust POD 1200mAh compatible with RPM and details families.Featuring north coil elegant glass, body color, internal capacity 1200mAh Voopoo Drag Specs 40W and 5W. Voopoo displacement data specifications for vaping and press the shutter button and two buttons feel very compact and ergonomic. Voopoo Drag 2 is available in two configurations and the magnetic characteristics of the connection.

Voopoo Drag 2 Mini Is An Devices

The Voopoo Drag 2 Mini is an ultra-portable devices innovative that take advantage of the nacelle and mod box and combine them into a single unit. Powered by the new gene chip has a 1500mAh battery and supports manual and automatic integrated vaping for your needs. In manual mode, you can adjust the output power of the vaporizer kit VOOPOO Pod Mod Kit buttons. Innovative blow against can monitor and record their usual two weeks vaping. color TFT screen of 0.96 inches lets you see all the statistics, VAPE such as batteries, shock and fashion / watt, etc.

VOOPOO Drag X VW Pod Mod Kit 80W

Voopoo Drag X Pod is an ultra-portable kit mod pod that combines the advantages of the device and mods pod housing. As a parallelepiped and covered with bright and hardware features. It is small, but equipped Voopoo Drag Starter Kit integrated battery for vaping. 1 – output range of 40 W, adjustable Vinci X Voopoo performance to match its style of vaping.

Vape Voopoo dried and fired

The first thing to say is that if burnt flavor vape worry. It happens to everyone and easy to fix. It has a burnt taste by axles Kit Vape Voopoo dried and fired when heated. Axis is a part of the evaporator eLiquid absorbing tank. eliquid shaft holds it before it is converted into steam when heated coil. If the shaft is not completely saturated with eLiquid when a breath is taken, this material can be charred a bad taste in the mouth and leave.Voopoo Drag Price the “Rap”.

All batteries eventually, but different vapers they happen at different speeds. Some users may change their heavy coils every week, while others need only in exchange coil once a month. This varies from one device to another, but hopefully later roles freezer for about two to three weeks. Once the coil is burned, there is not much you can do to free get the taste, unless changes coils. But there are some things you do extend your battery life. Oven learns all roles, but many new vapers would burn the rolls quickly because they do not know how to protect them. In this sense, this guide to solve new problems vapers compared with less sophisticated equipment. But that will not learn not inexperienced VAPERS: one or two things at once. Learn how to save money on the rollers and the best taste of each stroke evaporator.

If you just put in a new role and always get a burning sensation that can be caused by a chain evaporate when a puff per train between rests almost not taken. This is probably the most common cause of burns for the coil, especially for new vapers. Most Vapers connected evaporator at some point. Even experienced vapers can with the ignition key when Voopoo Drag X Revenger slide in the tank a little too very useful. Vaping chain the waves can damage to which the coil is not not enough time to absorb more eliquid between trains. This causes dry and burning wick.

Stop chain easily evaporate voice burnout. just leave 15 or 20 seconds of rest between two beats. In practice, however, it is often more difficult than that. Most Vapers, especially new vapers, were former smokers and had the habit of taking many small strokes as they would with a cigarette. Many also vapers nicotine can help addicted vaping and to fulfill this wish chain. If vaping chain nicotine addiction to satisfy, try with greater resistance to nicotine Voopoo Drag X Pod switching. You can also go to vape juice with high DP because they can provide a satisfactory long neck made many former smokers. You can also go longer accept slower and put evaporator hit back in the pocket to avoid temptation.

Why does my vape taste burnt?

If you vaping as the chain does not want to stop, then you might Voopoo Drag Vape. consider doing It takes a bit drained again flashes, but you do not have to wait until the juices to seep into its axis. It is recommended a mature product and not for new users. You can buy together two different devices and rings.